Flag digital printed
The flags in digital printing are made of our selected Flagtex polyester fabrics in the grammage 70 grams / m². Our fabrics are characterized by their good workmanship, a strong tear resistance, the identical slightly glossy coloring and a smooth surface structure. In addition, the fabrics are weatherproof and can be used for indoor and outdoor use. With our textile direct printing machines, we are able to reproduce all color values, photos and color gradients brilliantly. The color design takes place in the CMYK process and is applied to the fabric on one side in the textile deflector. The ink used is water-based and therefore environmentally friendly. This is fixed after the order on the textile with about 180 degrees. The printed image on the back is therefore mirrored. The throughput depends on the grammage of the material used. The color image of the back can be said to be nearly identical. The printing width of our systems and thus the seamless production is 310 cm. If larger dimensions are required, a color coordinated seam is added. The selected fabrics are also available with the option of flame retardancy. These meet the requirements of EN 13501-1. The flag border on the left side of the flag is adapted to the color design of the entire flag and is thus not only made up of tone-on-tone but also exactly tailored to the graphic design of the flag. The size of the flag seam adapts to the size of the flag and therefore the necessary flagpole. The end of the flag border is closed and reinforced accordingly. The flag is adorned with overlock seam / simple industrial seam without lap seam and convinces completely with a high processing and a corresponding longevity. Custom-made products in special colors, sizes or quantities can be produced on request in our in-house textile factory. Please note the corresponding care instructions.